Learn More

DIY BUILT IN SHELVES (CRAFT ROOM MAKEOVER)

Arrow

What You'll Need

– 12 of the 2.5 x 8 ft common wood boards (You can also use pallet wood) – 3 of the 1.5 x 8 ft – screws – drill – stain ( I used special walnut) – 1  of 11.25 x 8 ft  (Lowes was cheaper then home depot)

The dimensions of my custom shelf were 60″ in height and 28 1/2 ” in width. The depth was 11.5″.  To make my side panels and my top and bottom I had to use 4 of the  2.5″ (width) wood boards and 1 of the 1.5″ inches in width to equal a total of 11.25″. If your confused take a look at the video of how I made the panels.

My boxes are actually heavy duty moving cardboard boxes that I wrapped in canvas added handles and labels. Total cost for each box was about $4.

Can  you tell I love plants !! 😀 hehe 😀

I hope you enjoyed this DIY. If you have any questions feel free to comment😀

Tilted Brush Stroke

Visit

Arrow

A DIY BLOG, SHARING STORIES OF DESIGN BY LILY ARDOR