Creative Living..

I can’t say enough about this floor lamp… The pictures truly don’t do this baby 🙁  justice. I couldn’t be happier with the outcome. In fact my husband loved it so much he keeps asking me to make a twin to match this one. 😀 😀  lol. I’m actually considering it.  😀  I’m not going to get into to much detail because I am super excited to share this DIY.

Lets jump right in…

What you’ll need

I’m apologizing in advance if I missed something. give me a heads up if you notice anything missing.. Thanks. 😀

  • Measuring Tape
  • Pencil
  • Miter saw
  • Wood Glue
  • Ruler
  • Stain
  • Dowel Joints
  • Clear coat
  • Lampshade  (to see how I made this lampshade visit this link)
  • Floor lamp kit  (home depot sells them.. I spray paint mine copper)

 

  • 5x  2.5 by 8 feet boards  (mine were 3/4 inches in thickness

1. cut 4 pieces at 50″ inches in length… ( optional: Angled 10 degrees at the bottoms)

2. cut 2 pieces at 18″ MUST be  angled 10 degrees at the edges

3. cut 2 pieces at 7.5″  MUST be angled 10 degrees at the edges

4. Cut 1 piece measuring 2.5″ by 2.5″

diy floor lamp

Here’s and example to show you the angles for the base.

diy floor lamp

Here’s a snippet to show you the measurements you’ll need for the base.

diy floorlamp

Use a ruler to mark the center for each piece of wood. To get the holes drilled evenly.

I then drilled two holes on each side to insert my dowel joints. I started with a smaller drill bit and worked my way up until the hole was big enough to fit the dowel joints.

Don’t forget to use glue. I used gorilla wood glue.. LOVE IT.

diy floor lamp

This is how the top looks. 😀 Once I was done putting the base together I cut my 4 pieces measuring 50″ long and assembled the floorlamp together. Watch my video to see how I did it. 😀

Well what do you guys think?

I love the details in the wood grain. So beautiful.  It definitely has a rustic feel.

diy floorlamp

It’s a pretty cool floor lamp to have around 😀


This is totally optional… I also stapled the cording on the backside of one of the boards.

diy floorlamp

See you can barely see it this way.. 😀

diy floor lamp

And this is where it currently lives in our home. Right next to our bible reading spot. I love using it in the evenings to read the bible to our little guy.. It’s been very handy,…because let me tell ya… our house ain’t all that nice and the lighting is horrible. So this is the perfect home decor piece that is much needed in our home.

diy floorlamp

Thanks for tuning in. Till next time.